It could be time to retire your skateboard if it is too worn out, damaged, weak, or old to ride. Don’t discard it, though. You’ve had it for a long time. You’ve taken part in many awesome rides and pulled off some awesome stunts.
It would be unfortunate if the board ended up in the trash. Instead, display the board on your wall to give it credit. You may show it to all your skating visitors and spark a wonderful conversation while telling them about your amazing rides.
Also Read: How To Get Paint Off Vinyl Floor
Table of Contents
How to hang a skateboard on the wall?
The simplest method is to thread some string between two of the points where the hardware is installed, tie the other ending in a knot, and hang it from a pushpin, tiny nail, or whatever. You may use a small length of thread that will entirely disappear below the deck, or, as I prefer to do, you can use a longer piece that will allow you to simply position the board at the desired height.
Method 1: Hanging skateboard on the wall using fishing line
The most popular way to hang a deck vertically is via this technique. It doesn’t even need any tools. Wrap a fishing line around the board’s top. After that, pull downward until the board is straight. To complete this mission, you don’t need any specialized abilities. Adhere to the straightforward directions below to mount a skateboard to the wall.
Materials needed:
- Fishing line
- Screwdriver
- Nails.
- Hammer
It is simple and efficient to hang your skateboard using this technique. The following steps will teach you how to hang your skateboard using a fishing line.
Step 1: Take your skateboard’s trucks off
Turn the skateboard the other way, and then secure any bolts on a truck with pliers. After that, place the screwdriver’s point into the deck’s top screw.
Twist your screwdriver continuously until the screw is eventually removed. To remove one truck, complete this same process three times. Then repeat the process for the other truck.
Step 2: Fill these holes on your deck with a fine fishing line
The two screw holes that are closest to the skateboard. After that, use a pair of high-quality scissors to trim off 0.30m, or 1 foot, of the fishing line.
Then, while holding the deck securely, thread the fishing line through one of the holes on the bottom facing you. Then, pass it from the other side in your direction using the same line.
Step 3: Tie an appropriate knot
Given that fishing lines are quite slippery remember to tie a knot that will be securely secured. Instead, try tying a granny knot.
Keep the line from being tied too closely to those holes in your skateboard deck. Rather, leave only a tiny space between the deck and the knot. You may hang your skateboard on the wall using this to make it easier.
Step 4: Hammer the nail into the wall
In this phase, you must use a hammer to drive a nail into the wall. Pick up a sturdy nail and secure it firmly on the wall where you wish to mount your skateboard. Then, carefully drive the nail into your wall using a hammer.
Continue hammering the nail as long as it isn’t halfway through the wall, but don’t pound it in since you need some of it to flash outward. Take the skateboard, then hang your fishing line from it.
Step 5: use command hook to hang skatebaord without nail
If drilling is not possible, I propose using robust hooks rather than pounding nails into your walls. Because there won’t be as much friction between the nail and the line, your fishing line will also remain strong in this manner.
You can use a pencil and a straight line to mark the spot where you want your skateboard to hang to put the hook properly. In this manner, your deck will be properly aligned and straight when you hang it.
Method 2: Hang the skateboard on the wall using mount hanger rack
Many other kinds of wall mount kits are available on the market, but for this example, we’ll use the Sk8ology skateboard deck rack. This is a fantastic kit for mounting skateboards to the wall. Once mounted, the kit disappears behind the board, making it appear to be floating in the air.
Metal arms and a plastic base plate make up the two basic parts of this skateboard rack. Together, the two parts create a solid base for your skateboard.
Materials needed:
- Sk8ology desk rack
- Electric drill
- Screwdriver
- Measuring tape
So that you may do it on your own, follow all of these directions step by step.
Step 1: Drill a tiny hole and insert a wall anchor
Mark your location in a convenient location that is neither too near nor too far from the top and the side wall. You will be drilling a tiny hole in your wall where you plan to hang your deck at this stage. Next, insert a tiny wall anchor into the gap, ensuring it is strong enough to support the weight of your deck.
Step 2: Use a strong screw to fasten the deck display
After the anchor has been securely fastened, check to see if your deck display includes a powerful screw. Holding the skateboarding display against the wall, position it so that the hole you just drilled is exactly in the center. Use an excellent electric drill to create a clean hole!
Step 3: Turn those bolts in the direction of your wall and place the skateboard on the stand
Once the display is mounted on the wall, grab two bolts and securely twist them on either side of the skateboard. Then, position them correctly so you can hang your skateboard by sliding it onto the wall.
Step 4: Add the finishing touches to the display
Once you have completed all these steps, tighten two T bolts onto the deck by twisting them until you feel a firm grip.
You may use this to hold your skateboard deck firmly and prevent any of the deck’s components from contacting your wall.
So that’s how you install your skate deck in four easy steps.
Conclusion
Your property will look lovely decorated with decks. In addition to the techniques we covered above, there are other ways to hang a deck, but you can use any of them.
Follow the directions for the skateboard mounting technique that you like. On the other hand, you must own the tools mentioned in this post.
You can write your suggestions for hanging the board on the wall in the area below. We wish you the best of luck with your skating.
Frequently Asked Questions (FAQ’s)
How do you hang a skateboard on the wall without nails?
Skateboards may be hung on the wall using plastic hooks without damaging the surface. Make careful to verify the item’s weight capacity to ensure you obtain the finest hook available.
Can you hang a skateboard with Command Strips?
The strips often include adhesive on both sides; the glue side is for the hook, and the wall side is for sticking.
Where should you put your skateboard at home?
Always store your skateboard in a dry, warm, and secure location. By storing your skateboard properly, you may avoid the negative impacts of weather, water, and extreme temperature changes.
